Theater Calculators
TV Size vs Wall Size Proportion
https://www.theatersizing.com/calculators/tv-vs-wall-size/
Estimate only — not a calibrated SPL meter, an acoustic report or an electrical design. Confirm with measurement.
TV Size vs Wall Size Proportion
A 85-inch panel on a 2 m alcove looks stuffed; a 43-inch on a 4 m wall looks lost. This is taste with a number, not a building rule.
Inputs
Results
- TV width
- 1.44m
- TV / wall
- 0.60
- In 45–85% band?
- Yes
Calculation method
TV width from diagonal and aspect. Ratio = TV width / wall width. Balanced flag if 0.45–0.85.
Exact formula
r = W_tv / W_wall. Limits: no furniture, no fireplace, no gallery wall, 16:9 assumed unless you change aspect.
Related calculations
- Vertical placement — vertical placement
- Is the diagonal even watchable? — is the diagonal even watchable
Frequently asked questions
Why 45–85%?
A practical living-room band. Galleries and IMAX rooms ignore it on purpose.
Include the soundbar?
This is panel width only. A wider bar can make a small TV look even smaller.
Gallery wall?
Tape it. The calculator cannot see art.
More in this topic
All tools in this topicTV mounting & DIY
AV Rack U-Space Calculator
Sum AVR, disc, network and extras in rack units, add ventilation U, and round up the cabinet size.
TV mounting & DIY
Blackout Paint Light Reflectance Value Estimator
Estimate remaining bounce light from paint LRV and how many wall bounces, then a crude contrast-gain factor.
TV mounting & DIY
Helmholtz Resonator DIY Frequency Calculator
Tune a ported cavity to a room-mode frequency: f = (c/2π) √(A / (V L_eff)) with end correction.
TV mounting & DIY
Subwoofer Quarter/Eighth Space Placement Estimator
Add 0, 6, 12 or 18 dB of theoretical boundary gain for free, half, quarter or eighth-space sub placement.
TV mounting & DIY
TV Wall Mount Height (Eye-Level) Calculator
Place the TV centre at seated eye height, with an optional downward offset for a theater recline.
TV mounting & DIY
VESA Mount Weight and Leverage Compatibility
Check that the TV’s VESA pattern fits the mount and that the panel mass is under the mount rating.